# WallPlotter library

p5 helper for a Marlin polargraph over Web Serial. Coordinates are **mm**. Origin is machine home (`G92`). Y positive is up. Chrome or Edge, page on localhost or HTTPS.

Load from this package:

```html
<script src="../../lib/WallPlotter.js"></script>
```

Example sketch: `examples/zickzack/`.

---

## `new WallPlotter(options?)`

All options are optional.

| Option | Default | What it is |
|--------|---------|------------|
| `baudRate` | `115200` | Serial baud (must match Marlin) |
| `stepSize` | `10` | Keyboard jog step, mm |
| `feedRateTravel` | `1500` | Pen-up speed, **mm/min** (G-code `F`) |
| `feedRateDraw` | `300` | Pen-down speed, **mm/min** |
| `penUpGcode` | `M280 P0 S90` | Command to lift pen |
| `penDownGcode` | `M280 P0 S50` | Command to lower pen |
| `penUpDelayMs` | `150` | Pause after pen up, ms |
| `penDownDelayMs` | `50` | Pause after pen down, ms |
| `machineXMin` / `machineXMax` | `-830` / `830` | Overlay X extents, mm (idler spacing 1660) |
| `machineYMin` / `machineYMax` | `-1200` / `800` | Overlay Y; idlers at Y=800 (80 cm above work centre) |
| `jogIntervalMs` | `150` | Repeat delay while holding arrows, ms |
| `maxLogLines` | `8` | Serial lines shown on the HUD |
| `previewMinDelayMs` | `30` | Floor for preview segment wait, ms |
| `previewFrameMs` | `16` | Preview animation frame time, ms |
| `timingMultiplier` | `1` | Scale **Test** preview waits (`2` = twice as slow) |
| `onLog(line)` | no-op | Extra callback for each log line |
| `onStatusChange(status)` | no-op | `'connected'` or `'disconnected'` |

---

## Setup / UI

### `enableKeyInputs()`

Keyboard controls. Call from `setup()`. No arguments.

| Key | Action |
|-----|--------|
| `C` | Connect / disconnect |
| `T` | Run Test (preview) |
| `H` | Set home here (`G92 X0 Y0`) — required before Plot |
| `0` | Travel to `(0, 0)` |
| `P` | Toggle pen |
| `← → ↑ ↓` | Jog one step, pen up |
| `Shift + arrows` | Jog one step, pen down |
| `+` / `-` | Jog step size 1–100 mm |

### `enablePlotButtons(options?)`

Adds Connect, Plot, and Test buttons. Expects global `plot()` and `test()` in the sketch.

**Connect** is shown only while disconnected (same as key **C**). While a path is running, Plot becomes **Pause**; while paused it becomes **Resume**. Test becomes **Stop** during a test.

| Option | Default | What it is |
|--------|---------|------------|
| `parentId` | `'wallplotter-controls'` | DOM id for the button row |
| `connectLabel` | `'Connect'` | Connect button text |
| `plotLabel` | `'Plot'` | Plot button text when idle |
| `pauseLabel` | `'Pause'` | Plot button while a path is running |
| `resumeLabel` | `'Resume'` | Plot button while paused |
| `testLabel` | `'Test'` | Test button text |
| `stopLabel` | `'Stop'` | Test button while a test is running |

### `showInfos()`

Draw HUD, path preview, bounds, and key help. Call every frame from `draw()`. Also runs held-arrow jogging when keys are enabled.

---

## Speed

### `setSpeed(travel, draw)`

Feed rates in **mm/min**. Used as G-code `F` and for Test preview timing. Clamped to **1–10000**.

- `travel` (number): pen-up / `move()` speed. Or `{ travel, draw }`.
- `draw` (number, optional): pen-down / `draw()` speed. Omit to leave draw rate unchanged.

Practical range about **100–10000**. Values above **10000** are clamped. Do not use `0`.

```javascript
wp.setSpeed(6000, 2500);
wp.setSpeed({ travel: 6000, draw: 2500 });
```

### `setTimingMultiplier(mult)`

Scales **Test** preview waits only. Plot is paced by Marlin (`ok` + `M400`).

- `mult` (number): `1` = match `setSpeed` estimate, `2` = twice as slow, `0.5` = twice as fast. Clamped to ≥ `0.1`.

---

## Path (buffered drawing)

`move` / `draw` / `wait` / `speed` only **queue**. Nothing is sent until `runPath`.

### `startPath()`

Clear the path buffer. Returns `this`.

### `move(x, y)`

Queue pen-up travel to `(x, y)` mm. Returns `this`.

### `draw(x, y)`

Queue pen-down stroke to `(x, y)` mm. Returns `this`.

### `wait(ms)`

Queue a pause. `ms` is milliseconds. On Plot, sends `G4 P<ms>`. Returns `this`.

### `speed(travel, drawRate)`

Queue a mid-path speed change (mm/min, clamped 1–10000). Either argument may be omitted. Restored after `runPath`. Returns `this`.

### `runPath(testOnly)` / `runPath(commands, testOnly?)`

Run the path. **async**.

- `testOnly` (boolean): `true` = preview only, no serial. `false` = send G-code. Home must be set for Plot.
- `commands` (array, optional): explicit list instead of the `startPath()` buffer.

Plot: wait for Marlin `ok`, then `M400` (move finished). Test: animate using distance / `setSpeed` × `timingMultiplier`.

```javascript
wp.startPath();
wp.move(-200, -200);
wp.draw(200, -200);
wp.wait(500);
await wp.runPath(false); // plot
await wp.runPath(true);  // test
```

Sketch: `plot()` → `runPath(false)`, `test()` → `runPath(true)`.

### `estimatePathMs(commands?)`

Returns estimated duration in **milliseconds** for the current path buffer, or for `commands` if given. Uses `setSpeed`, queued `speed()`, `wait()`, and `timingMultiplier`. The HUD shows elapsed / est / remain while plotting.

### `stopPath()` / `stopPlot()`

`stopPath()` aborts the current `runPath` after the in-flight command gets its `ok` (it does not cancel that wait — that was dropping the next `ok`).

`stopPlot()` first press is the same as **Pause**: finish the current stroke, then **Resume** continues. Second press stops the browser from sending more moves. The **in-flight** `G1` still runs — this firmware does not have `EMERGENCY_PARSER`, so `M410` cannot interrupt motion (and on a polargraph it desyncs belts). Unplug power for a hard stop.

### `pausePlot()` / `resumePlot()`

**Pause** / first **Stop** wait for the current segment to finish (`M400`), then lift the pen. Do not resume after emergency stop until you re-home. Elapsed / remaining HUD time freezes while paused.

---

## Serial / machine

All **async**. Coordinate moves on Plot require home (`H`) first.

### `connect()`

Web Serial port picker, enable steppers (`M17`), pen up, query polargraph area (`M665` → machine overlay bounds), `M114`. Reload/close releases the port (needed on macOS). If only one previously allowed port exists, it is reused.

### `disconnect()`

Close the serial port.

### `send(line, options?)`

Write one G-code line and wait for Marlin `ok`.

- `line` (string): command without newline, e.g. `'M114'`.
- `options.allowWithoutHome` (boolean): allow `G0`/`G1` before home. Default `false`.
- `options.waitOk` (boolean): wait for `ok`. Default `true`.
- `options.timeoutMs` (number): `ok` timeout. Default **15000**. `M400` / `G4` use a longer timeout based on the move or dwell. After 1s with no `ok`, the log shows `waiting for Marlin ok` and the HUD says **Waiting for plotter…**. During a plot, a timeout **pauses** so **Resume** can continue; **S** / Stop does the same.

### `penUp(force?)` / `penDown(force?)`

Send pen G-code and wait the pen delay. By default, no-op if already in that state. Pass `true` to always send (used by `P` and on connect) so you can test the configured angles.

### `moveTo(x, y)`

Pen up, travel to `(x, y)` mm immediately (not queued). Requires home.

### `drawTo(x, y)`

Pen down, draw to `(x, y)` mm immediately. Requires home.

### `goToZero()`

`moveTo(0, 0)`.

### `step(dx, dy, draw?)`

Relative move in mm.

- `dx`, `dy` (number): delta mm
- `draw` (boolean, default `false`): `true` → `drawTo`, else `moveTo`

### `setHomeHere()`

`G92 X0 Y0`. Sets local `x,y` to 0 and marks home as set.

---

## Fields (read)

| Field | Meaning |
|-------|---------|
| `connected` | Serial open |
| `homeSet` | Home was set with `H` / `setHomeHere()` |
| `x`, `y` | Current position, mm |
| `isPenDown` | Pen state |
| `isPlotting` | `runPath` in progress |
| `isPaused` | `runPath` is paused |
| `feedRateTravel` / `feedRateDraw` | Current speeds, mm/min |
| `timingMultiplier` | Preview wait scale |
| `stepSize` | Jog step, mm |